Active calls

Active calls tool is used for monitoring of active calls in the System.

WARNING

Active calls information fetched from Yeti nodes when you open this page and not updates automatically

Attributes

Start Time

Date and time when the call was received by Yeti.

Connect Time

Date and time when the call was answered (200 OK received).

Duration

Current call duration in seconds.

Time Limit

Maximum allowed call duration in seconds. The call will be forcibly disconnected when this limit is reached.

Src Prefix In

Source number (A-number) received from the origination gateway.

Src Prefix Routing

Source number used for routing after number translation.

Src Prefix Out

Source number sent to the termination gateway.

Dst Prefix In

Destination number (B-number) received from the origination gateway.

Dst Prefix Routing

Destination number used for routing after number translation.

LRN

Ported number returned by the LNP database lookup (if performed).

Dst Prefix Out

Destination number sent to the termination gateway.

Diversion In

Value of the SIP Diversion header received from the origination gateway.

Diversion Out

Value of the SIP Diversion header sent to the termination gateway.

Src Country

Source country detected from Network Prefixes data.

Src Network

Source network detected from Network Prefixes data.

Dst Country

Destination country detected from Network Prefixes data.

Dst Network

Destination network detected from Network Prefixes data.

Customer

Contractor who originated the call.

Vendor

Contractor acting as the termination provider.

Customer Account

Account of the customer being charged for the call.

Vendor Account

Account of the vendor used for cost tracking.

Customer Auth

Customer Auth that authorised this call.

Orig GW

Gateway where the call was received from.

Term GW

Gateway where the call is being sent to.

Rateplan

Rateplan used for customer billing.

Destination

Destination matched for this call.

Routing Plan

Routing Plan used for routing this call.

Routing Group

Routing Group used for this call.

Dialpeer

Dialpeer selected for termination.

Destination Initial Rate

Per-second customer billing rate for the first billing interval.

Destination Next Rate

Per-second customer billing rate after the initial interval.

Destination Initial Interval

Duration (in seconds) of the first billing interval for the customer.

Destination Next Interval

Duration (in seconds) of subsequent billing intervals for the customer.

Destination Fee

Connection fee charged to the customer for this call.

Dialpeer Initial Rate

Per-second vendor cost rate for the first billing interval.

Dialpeer Next Rate

Per-second vendor cost rate after the initial interval.

Dialpeer Initial Interval

Duration (in seconds) of the first billing interval for the vendor.

Dialpeer Next Interval

Duration (in seconds) of subsequent billing intervals for the vendor.

Dialpeer Fee

Connection fee charged by the vendor for this call.

LegA Remote IP / Port

IP address and port of the origination gateway as seen by the Yeti node.

LegA Local IP / Port

IP address and port on the Yeti node that received the call.

LegB Remote IP / Port

IP address and port of the termination gateway.

LegB Local IP / Port

IP address and port on the Yeti node used for the outgoing leg.

Orig Call ID

Value of the SIP Call-ID header received from the origination gateway.

Term Call ID

Value of the SIP Call-ID header sent to the termination gateway.

Local Tag

Internal session identifier for call legA.

Node

Yeti node currently processing this call.

PoP

Point of Presence of the node processing this call.