Additional termination provider

In this Chapter we’ll add additional local termination partner(Vendor 2) who providing route to 38048705 prefix with price $0.2 per minute. We also will provide better price to this destination for customer. Configuration based on Chapter 2

        graph LR
    gw1[Customer gw</br> IP 127.0.0.1]
    gw2[Vendor gw</br>IP 128.0.0.1]
    gw3[Vendor2 gw</br>IP 129.0.0.1]

    subgraph yeti[Yeti SBC]
            subgraph Rateplan
                    destination380[Destination</br>prefix: 380</br>rate:1.5]
                    destination38048705[Destination</br>prefix: 38048705</br>rate:1.0]
            end
            subgraph RoutingPlan
                    dialpeer380[Dialpeer</br>prefix: 380</br>rate:1.0]
                    dialpeer38048[Dialpeer</br>prefix: 38048</br>rate:0.5]
                    dialpeer38048705[Dialpeer</br>prefix: 38048705</br>rate:0.2]
            end

    end


    gw1 -->|Call to <b>380</b>662296132</br> rate $1.5/minute| destination380
    destination380 --> dialpeer380
    dialpeer380 -->|Call to <b>380</b>662296132</br> rate $1.0/minute| gw2

    gw1 -->|Call to <b>38048</b>7050321</br> rate $1.5/minute| destination380
    destination380 --> dialpeer38048
    dialpeer38048 -->|Call to <b>38048</b>7050321</br> rate $0.5/minute| gw2

    gw1 -->|Call to <b>38048705</b>0321</br> rate $1.0/minute| destination38048705
    destination38048705 --> dialpeer38048705
    dialpeer38048705 -->|Call to <b>38048705</b>0321</br> rate $0.2/minute| gw3

    linkStyle 0 stroke-width:2px,fill:none,stroke:green;
    linkStyle 1 stroke-width:2px,fill:none,stroke:green;
    linkStyle 2 stroke-width:2px,fill:none,stroke:green;
    linkStyle 3 stroke-width:2px,fill:none,stroke:blue;
    linkStyle 4 stroke-width:2px,fill:none,stroke:blue;
    linkStyle 5 stroke-width:2px,fill:none,stroke:blue;
    linkStyle 6 stroke-width:2px,fill:none,stroke:violet;
    linkStyle 7 stroke-width:2px,fill:none,stroke:violet;
    linkStyle 8 stroke-width:2px,fill:none,stroke:violet;

1. Creation of new Vendor and Account

At the first step we’ll configure one additional Contractor and Account for it

Object to create

Attributes

Contractor

  • Name: Vendor2

  • Enabled: True

  • Vendor: True

  • Customer: False

Account

  • Name Vendor2 Account

  • Contractor: Vendor2

  • Max Balance: 100

2. Creation of new termination Gateway

At the second step we’ll configure one additional termination Gateway that will be linked to Vendor2

Object to create

Attributes

Gateway

  • Name: Vendor2 Gateway

  • Contractor: Vendor2

  • Enabled: True

  • Allow origination: False

  • Allow termination: True

  • Host: 129.0.0.1

3. Creation of additional Dialpeer

At the third step we’ll configure one additional Dialpeer to route calls to prefix 38048705 via new termination gateway with price $0.2 per minute.

Object to create

Attributes

Dialpeer

  • Prefix: 38048705

  • Enabled: True

  • Routing Group: My RoutingGroup

  • Vendor: Vendor2

  • Account: Vendor2 Account

  • Initial Rate: 0.2

  • Next Rate: 0.2

  • Gateway: Vendor2 Gateway

4. Test the call

For the call testing it is necessary to fill Routing Simulation form and to press Simulate routing button.

Field name

Value

Remote ip

127.0.0.1

Remote port

10000

Src number

001234567890

Dst number

380487050321

As a result two records will be shown, where the first record is an actual record of Call Profile that will be send to the Yeti/SEMS node for making call. This Call Profile uses Gateway C for termination the call. Full log of call processing also will be shown under the resulting records.

Note

If you don’t see necessary results, please, make sure that you enter everything correctly.