Routing Tag detection Rules

Routing Tag detection Rules are used for changing set of Routing tags (that are used for routing of calls) by source and destination Areas that are determined via Area prefixes table and by source and destination prefixes. Rule will be chosen only in case of matching all conditions (Src & Dst Areas, Src & Dst prefixes) that are not empty.

Routing Tag detection Rule’s attributes:

Id

Unique Routing Tag detection Rule’s id.

Routing tag ids

Allows to choose Routing tags that should be set for the call at the previous steps (Authentication, Numberlist processing etc.). In case of matching between Routing tags that were chosen for the call and Routing tags that were chosen in this field - Yeti will check Area (source and destination) and will apply (if any) Tag actions bellow.

Routing tag mode

Allows to choose Routing tags comparison mode (OR or AND). In the OR mode at least one Routing Tag (from the list of Routing Tags that were chosen for the call during the routing algorithm) should be included in the set of Routing Tags that are chosen for this Routing Tag detection Rule record. In the AND mode all Routing Tags (that were chosen for the call during the routing algorithm) should be the same with the set of Routing Tags that are chosen for this Routing Tag detection Rule record.

Src area

Source Area (could be empty).

Dst area

Destination Area (could be empty).

Src prefix

This field is used for setting prefix of source number (A-number). This Rule will be chosen only in case of matching this Prefix with first symbols of A-number (together with other conditions). This field could be empty.

Dst prefix

This field is used for setting prefix of source number (B-number). This Rule will be chosen only in case of matching this Prefix with first symbols of B-number (together with other conditions). This field could be empty.

Tag action

Describes one of the possible actions that could be applied to the current set of Routing Tags that are applied for the call with using Tag action value below. Routing Tag detection Rule it is third (and last) step (after Numberlists) where Routing Tags can be added to (or removed from) the call. Following actions can be selected in this field:

  • Clear tags. Removes all Routing Tags from the call (if any were added early);

  • Remove selected tags. Removes only Routing Tags that were chosen in the Tag action value field bellow (if any were chosen) from the call;

  • Append selected tags. Appends Routing Tags that were chosen in the Tag action value field bellow (if any were chosen) to the call;

  • Intersection with selected tags. Yeti leaves as is Routing Tags that were chosen in the Tag action value field bellow (if any were chosen) in the call in case of their presence in the current set of Routing Tags and removes any other Routing Tags from the call.

Tag action value

In this field Routing Tags for making some Tag action above could be chosen.